MSLRX02 DIGITAL MAMMOGRAPHY MACHINE

Description

1

Mammography System

Integrated System (Generator Integrated within the main device)

High voltage generator output: ≥100 kHz, 20 kV to 40 kV increment step: 1 kV

High performance X-ray tube:

Standard：Molybdenum Anode, Focal Spot Size: 0.1 mm (Small)/ 0.3 mm (Large)

Optional：Tungsten Anode, Focal Spot Size: 0.1 mm (Small)/ 0.3 mm (Large)

Support isocenter rotation function

C-arm Rotation range: +180°～ -135°

Height range of breast support surface: 735mm-1315mm;

C-arm power-driven electrically, Dual side digital display;

Compression plate: flexible and multi-level smart Compression

Spatial Resolution: >6 Lp/mm

Detector type: Amorphous Silicon Detector

Effective Imaging Area: 24*30cm

Acquisition Station compatible with DICOM 3.0

Focal distance : 650mm

Added filter: Mo / Rh

Added filter Switch: Manual/Automatic

X-ray Field adjustment: Manual

Magnification factor: 1.5

Exposure mode: Manual / AEC

Supply: 220V～,±10%

Frequency: 50/60Hz±1Hz

Max. power : 5000 VA

N.W.: 240 Kg

Compact design, minimum device height: < 1.1 m

Packing Size: 121 X 94 X 145 CM

2

High-Voltage Generator

b)  Tube voltage Range: 20 kV ～ 40 kV in 1 kV step;

c)  Max Output: 4 kW;

d)  Max tube voltage:40kV;

e)  Max tube current: 140mA;

f)  Max current time product: ≥630mAs;

g)  Ripple: ＜4%.

3

Imported X-ray tube for Mammography;

Anode Type: Molybdenum;

Focal Spot Size: 0.1 mm (Small)/ 0.3 mm (Large)

Permanent filtration: 0.5mmBe

Max anode speed: 10000rpm/min;

Max tube voltage:40kV;

Max tube current: 35mA(small)/140mA(Large)

Anode heating capacity: 300 kHu

Imported X-ray tube for Mammography;

Anode Type: Tungsten;

Focal Spot Size: 0.1 mm (Small)/ 0.3 mm (Large)

Permanent filtration:0.5mmBe;

Max anode speed: 10000rpm/min;

Max tube voltage:49kV;

Max tube current: 35mA(small)/140mA(Large)

Anode heating capacity: 300 kHu

4

Beam Limiting Device

Adjustable X-ray field manually.

Light field indicator is on automatically as compression plate moves down;

Light field indicator is off with delay as compression plate stops moving;

e)  Off delay of light field indicator can be set via software.

5

C-arm stops automatically at common mammographic position: CC, OBL and LAT;

Rotation angle of OBL position can be set via software;

Support table up-down range: 735mm(L)～1315mm(H);

Rotation type of C-arm: isocenter rotation around the examined part;

Rotation range of C-arm: -135^o～180^o

Distance between focal spot and image reception area:650mm;

Magnification factor:1.5

Device can be installed in the movable physical vehicle as max height of device is less than 110cm;

Local display panel on the both side of the stand can indicate rotation angle of C-arm;

For safer operation, emergency stop button is locate on the top of C-arm;

Duplex foot switch(2 pcs) provided.

Compression control: continuous activation by foot;

Compression mode: flexible and multi-level compression, automatic and manual decompression;

Compression plate travel range: 5～268mm;

Compression force: 0～200N

Compression thickness: 5～268mm

Size of compression plate: 24X30cm.

7

Local Operation and Display

b) Parameters displayed:

–  rotation angle of C-arm;

–  compression thickness;

–  compression force;

–  KV;

–  mAs;

–  density

–  focal spot selected;

–  exposure mode;

–  Added filter selected;

–  automatic decompression indication;

–  state indication;

–  failure alarming indication;

c) Control function:

–  KV;

–  mAs;

–  density

–  selection of focal spot;

–  selection of filter;

–  selection of mammographic mode;

–  selection of automatic decompression    after exposure.

8

Anti-scatter Grid

Grid ratio: 5:1;

Grid density: 41 L/cm;

Grid focal distance:65cm；

Manually unload grid in magnification mode.

Material: Amorphous Silicon + CSI;

Min. pixel: 85µm;

Image Matrix Sizes: 2816×3528 pixels;

Effective Imaging Area: 24cm×30cm;

Image Reading Duration: ＜1.4s;

Interval Duration: ＜30s;

Spatial Resolution: 6 lp/mm;

MTF: 50%;

DQE: 65% (1 Lp/mm);

Output Gray scale: 14 bits

LCD Display

Image Acquisition Software

Image Detector Self-check and adjustment

Patient Information and Image Management

Auto Explore Control

Acquisition of Explored Image Information

Browsing and Searching of Image

Measure the Distance, Angle, Space of Image and Mark The Selected Area

Image Process after Acquisition: Black and white reverse, rotate and flip, zoom, local editing, enhancement, filtering noise, copies, abridged, etc.

DICOM 3.0 Services (Print, Store, Query/Retrieve, CDRW, Scheduled Workflow and Patient Information Reconciliation)

Automatic failure diagnosis, error code and message indication;

Exposure activation: exposure button;

Data backup and recovery.

11

Integration detector;

Automatically position selection.

d)  Automatically kV, filter and mAs selection.

12

Pre-Installation Manual

Item

Description

1

Item

Temperature

Humidity

Atmosphere Pressure

Shield Room

15℃～35℃

30%～60%

（No dewing）

700hPa～1060hPa

Operator Room

10℃～40℃

20％～80％

（No dewing）