TI-1206S 6 Zones Mixer Amplifier with Mp3

Description

.4 Channel Microphone and 2 line input, treble and bass can be controlled separately .
. Mic1- 4 built-in 48V phantom power supply, and switch can be independently controlled.
. Support 1-channel remote microphone input, which can be connected to up to 6 remote zone microphones for remote control zone output.
. Support 1-channel EMC emergency alarm audio signal input interface, with the highest priority.
. Support 1-channel TEL telephone audio input interface, and the volume can be adjusted.
. Configure MP3 remote control, support power-off memory function and MIC recording function.
. With MP3 function module, adopt LCD display, support playback of various file formats in U disk such as MP3, WMA, APE, FLAC, WAV, and AAC; with TF card, support mobile phone Bluetooth function, and can display song names.
. Integrated bluetooth module, support playing music through mobile phone bluetooth.
. Integrated tuner module with FM radio port.
. Support 6 zone output, constant voltage 100V output, each zone volume can be adjusted independently.
. Constant voltage output: 70V, 100V, rated resistance output: 4-16 Ω.
. Support 1-channel line output and can be connected with recording or sound reinforcement processor.
. Built in bell, optional tone: 4 tones and 2 tones (built-in), alarm generator.
. When the built-in alarm generator is started, turn off the background music, 6 zone output will be automatically turned on, and the maximum output volume function will be forced to be switched off.
. A variety of indicator lights (signal, the top of the roof, to protect the LED indicator)
. Using fan forcible cooling structure, allowing the machine to work for a long time.
. There are 5 priority functions:
The first level EMC priority: when input the EMC alarm signal, all the sound source will be turn off, and the 6 Channel partition output will automatically open.
Second level: TEL/REM MIC override MIC1-4, LINE1-2 and bell tone.
Third level: built-in alarm generator override bell sound, MIC1-4, LINE1-2, 6 partition output will automatically open.
Fourth level: built-in bell tone override MIC1-4, LINE1-2.
Fifth level: built-in MIC1 override MIC2-4, LINE1-2.
. Support standby power supply 24 V no delay switching function, optional.
. It has the function of power fluctuation protection, over-voltage protection and under voltage protection.

Specifications:
Model:TI-1206S
Amplifier Section(Load 100V Output)
Rated Output Power (THD 1%):120W(RMS)
Speaker Zone 1~6 Output:50W MAX
Input Sensitivity/Impedance:5mV 600Ω/350mV 10KΩ BAL
S/N Ratio:Better than 75dB
Frequency Response (±3dB):80Hz~16KHz
Tone Control (Bass:100Hz, Treble:10KHz):±10dB
Phantom Power:+ 48V
Line Input Section(Mic 1~2 In@1KHz)
Input Sensitivity/Impedance:350mV/47KΩ
S/N:Better than 80dB
Frequency Response (±3dB):80Hz~16KHz
Tone Control (Bass: 100Hz,Treble:10KHz):±10dB
Input Sensitivity/Impedance:775mV/10KΩ
S/N:Better than 75dB
Frequency Response (±3dB):50Hz~16KHz
Input Sensitivity/Impedance:775mV/10KΩ
S/N:Better than 75dB
Frequency Response (±3dB):80Hz~16KHz
Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In)
1V/600Ω:Remote MIC Sensitivity/Impedance
775mV/10KΩ:THD:≤ 0.1% at 1KHz, 1/3 rated power
Power Supply:~110V/60Hz or ~230V/50Hz & DC 24V
Power Consumption:210W
Weight:6.7Kg
Dimensions:484x310x88 mm