TH-702 Trimming Hood

Description

1. Specifications: 1800 (L) 800 (W) 2000 (H) mm ± 50mm. The whole is made of 316 stainless steel,
and the table is made of 2.0mm thick 316 stainless steel.
2. The suction negative pressure exhaust design is adopted after the table, not the exhaust mode
under the lower table, not the transparent structure without backplane. The exhaust position is 20cm
on the operating table.
3. Magnetic adsorption tool rack can absorb metal equipment, material equipment and anatomical
equipment on it for convenience, with built-in glove rack.
4. Formalin electric filling assembly (Description: with foot switch control, motor made of corrosion
resistant materials and formalin recovery system.
5. Automatic balance air supplement system, forming air curtain through airflow control, to prevent
the leakage of toxic gas.
6. The lifting device of the whole machine: adjust the height of the lifting table, the lifting range is
200mm, to meet the height needs of the staff, use the pressure synchronization system, the lifting
device is a light aluminum synthetic material, no sound in the process.
7. Use LED clean lighting, with illumination of 80 microwatts per square centimeter.
Hidden-mounted ultraviolet lamp. The disinfection device mainly used to operate the table area will
automatically turn the table over, while the lighting device will be automatically hidden.
8. Faucet: double faucet design, use water when taking materials, adjust the wall, the other one is
water for tank cleaning, high-neck stainless steel faucet. (Compulsory energy saving product certificate)
9. Sink: located on the right side of the table, (300mm 300mm 250mm) ± 5mm, the bottom of the inner tank is designed without dead space circular arc, movable flushing faucet: pull type washing,
used to clean the internal working space and dead space of the material table.
10. Organization grinder: 370W, 2600 rpm, full sound insulation cover, all stainless steel grinding
components. It is connected with the drainage hole at the bottom of the sink and is mainly used for
the crushing discharge of pathological tissue.
11. The table is equipped with movable screen plate is easy to clean, the material table: 400mm
300mm 100mm, lower cabinet body: using three cabinet door arc design double plate, the operation
platform from the ground height is 800mm-850mm.
12. Internal air purification device: ozone + anion purification,
13. The exhaust of the material platform is connected with the overall exhaust system, and the
intelligent control system is connected for control to realize data interconnection.
14. Display≥ 17 inches, resolution ≥1920 * 1080(Optional)
15. Integrated control display supports independent control of typhoon volume, wind speed and
wind pressure, and interacts with the adjustment and changes of wind volume, wind speed and wind
pressure of the total ventilation system of the laboratory. Built-in storage chip, with fault display,
sound and light alarm, intelligent wireless fault information report, mobile query and other functions.
Equipped with LED light, USB main interface, connected printer and keyboard.

Configuration Listing
1.One main machine
2.One shredder
3.Two faucets
4.1 table with a ruler
5.1 set of display device and professional support
6.One ultraviolet lamp
7.LED flat panel lighting lamp 1
8.One knife suction device
9.Waterproof power socket 2
10. Storage table 1
11. One glove box
12. 1 set of automatic liquid and recovery system
13. 1 set of lifting system

Package Info:
Each instrument packed Wooden Case
Dimensions: 1890*810*1970 mm,
Gross Weight:160 kg